sE Electronics DM1 Dynamite Active in-Line Preamp for Dynamic and Passive Ribbon Microphones Bundle with Blucoil Boom Arm Plus Pop Filter, 10' XLR Cable, and 5-Pack of Reusable Cable Ties

Brand: blucoil

Features:

• BOOSTS SIGNAL LEVEL OF LOW-OUTPUT MICS - The sE Electronics DM1 Dynamite delivers +28dB of clean, transparent gain to dynamic and passive ribbon microphones. It provides neutral, balanced sound quality without breaking your bank.
• DELIVERS PRISTINE, LOW-NOISE SOUND QUALITY - The built-in high-grade FETs and sophisticated class-A design provides the lowest noise in its class. You're reassured that you get a 100% uncolored tone when the DM1 is connected.
• ENSURES CONSISTENT GAIN - The dedicated output buffer amplifier makes sure DM1's +28dB gain stays consistent regardless of the connected load. You can run long cable runs without worrying about buzz or hum.
• REJECTS ELECTRICAL INTERFERENCES - DM1's rugged all-metal housing blocks any noise and electrical interference. Plus, the preamp's slim design allows for easy placement in your home studio or on stage.
• INCLUDES - sE Electronics DM1 Dynamite Active in-Line Preamp for Dynamic and Passive Ribbon Microphones. Blucoil All-in-One Microphone Boom Arm Plus Pop Filter. Blucoil 10-Foot Balanced XLR Cable - Premium Series 3-Pin Cable for Microphones, Speakers, and Pro Devices (Male-to-Female). 5-Pack of Blucoil Reusable Velcro Cable Ties.

PartNumber: A2730

Details: sE Electronics DM1 Dynamite Mic Preamplifier Achieve the perfect boost for your passive mic with sE Electronics' DM1 Dynamite. This in-line preamp offers consistent +28dB of clean gain without adding noise or coloration. Its low-noise output impedance allows you to drive long cable runs while reducing the RF susceptibility. sE Electronics recommend plugging DM1 directly into your microphone's XLR output for optimum results. Nevertheless, you can use an XLR cable between the mic and DM1 if necessary. *NOTE: The DM1 requires 48V phantom power. It does NOT work with phantom-powered microphones such as condenser and active ribbon mics.TECHNICAL SPECS: Type: In-line Mic Preamp Gain: +28dB (Load 1 kOhm) Frequency Range: 10Hz~120kHz (0.3dB) Max Output Level (0.5% THD) 8.3dBV (2.6V) Output Noise Level: 9-microvolt (JIS-A) Required Phantom Power: 48V Connectors: 3-Pin XLR-Male/Female Dimensions: 0.75" x 3.76" Weight: 0.17 LBAlso Comes With:Blucoil Boom Arm Plus Pop FilterThe 30" long Blucoil Boom Arm accommodates all kinds of microphones and shock mounts (3/8"-5/8" threading adapter and mic clip are included). It is made of heavy-duty steel, zinc alloyed parts, and can be fully rotated 360-degrees. The foldable boom arm includes a removable Blucoil Pop Filter that reduces hisses and p-popping. *NOTE: Install the boom arm vertically for it to hold up the weight of a 3.3 LB microphone.Blucoil 10-FT Balanced XLR CableThe 10-foot Blucoil cable interconnects your microphone to an audio interface, mixer, or preamp. It is made with premium Male-to-Female Neutrik-equivalent Zinc Alloy connectors and protected with a high-density PVC jacket. The 92% shielding blocks EMI/RFI while the OFC wires deliver the best possible conductivity and avoid unwanted degeneration.Get the DM1 Bundle today and receive 5-Pack of Blucoil Reusable Velcro Cable Ties!

UPC: 810084785676

EAN: 0810084785676

Model: A2730

Item Condition: New