blucoil Cloud Microphones Cloud Lifter CL-1 Mic Activator Bundle with MXL R144 Ribbon Microphone with Shockmount for Vocals, Guitars, Brass, and Amps, 2X 10' XLR Cables, Pop Filter, and 5X Cable Ties

Brand: blucoil

Color: Brass

Features:

• BOOSTS YOUR MIC GAIN - Cloud Microphones' Cloud lifter CL-1 turns your mixer/preamp's +48V phantom power into ultra-clean +25dB gain. It helps optimize the impedance loading of low-output microphones. No complicated setup or drivers are required.
• DELIVERS CRYSTAL-CLEAR AUDIO - The Cloud lifter's discrete JFET circuitry preserves the natural organic sound captured by the MXL R144 Microphone. It provides a clean direct audio path, so you can record crisp sounds across the 20Hz-17kHz frequencies.
• PROVIDE SMOOTH MIDS WITH NATURAL CHARACTERISTICS - The MXL R144 Microphone features a 1.8-micron 47mm aluminum ribbon capsule. It offers the classic ribbon sound with a rich midrange and rolled-off top end.
• SAFELY HANDLES LOUD SOURCES - You can use the ribbon mic with loud horns, electric guitars, and even amps, thanks to its high 130dB SPL handling. R144 has a figure-8 polar pattern that perfectly captures your vocals, guitars, brass, and room sound.
• INCLUDES - Cloud Microphones Cloud lifter CL-1 Mic Activator. MXL R144 Ribbon Microphone with Shockmount; Carrying Case. 2-Pack of Blucoil 10-Foot Balanced XLR Cables - Premium Series 3-Pin Cable for Microphones, Speakers, and Pro Devices (Male-to-Female). Blucoil Audio Microphone Pop Filter Double Layer Mask Shield for Studio Recording and Broadcasting with Stand Clip Stabilization Arm, Swivel Mount. 5-Pack of Blucoil Reusable Velcro Cable Ties.

PartNumber: A2706

Details: Cloud Microphones Cloudlifter CL-1 Mic ActivatorElevate your mic sound with the Cloudlifter CL-1. Cloud Microphones designed CL-1 to optimize the performance capabilities of your passive dynamic, ribbon, and tube mics. It converts your preamp's +48V phantom power into 25dB of ultra-clean gain. The plug-and-play Cloudlifter boosts the audio signal but doesn't add any color to the mic's natural sound. It is a cost-effective solution for cleaning up noisier, low-output mics, and preamps. Professional sound engineers prefer to use CL-1 for reducing line noise on long cable runs. It improves the gain before feedback ratio for public speakers and boosts the signal of quiet instrument sources such as percussion and acoustic guitars.*NOTE: The Cloudlifter does not pass off the phantom power into your mic.TECHNICAL SPECS:No. of Channels: 1Gain: +25dBI/O Connectors: XLRSize: 4.5 x 2 x 2"Weight: 0.85 LBAlso Comes With:MXL R144 Ribbon MicrophoneThe MXL R144 Ribbon Microphone offers a rich, warm sound ideal for recording vocals and guitars. It is equipped with a 1.8-micron aluminum ribbon capsule that provides creamy smooth sounds and warm, natural characteristics. Thanks to R144's figure-8 polar pattern, it perfectly captures your instruments' sound plus the room's acoustics. The MXL R144 Ribbon Microphone can be used for miking loud sources too. Its high 130dB SPL handling works with horns and electric guitars.TECHNICAL SPECS:Element: 1.8-micron Aluminum Ribbon | Ribbon Length: 47mmPolar Pattern: Figure-8Frequency Response: 20Hz-17kHzMax SPL Handling: More than 130dB at 1kHzSensitivity: -56dBConnector: XLRWeight: 0.85 LBAccessories: Shockmount; Carrying CaseGet the CL-1 Bundle today and receive these Blucoil exclusives:2-Pack of 10-Foot Balanced XLR Cables5-Pack of Reusable Velcro Cable TiesMicrophone Pop Filter Windscreen

UPC: 810084785331

EAN: 0810084785331

Model: Cloudlifter CL

Binding: Electronics

Item Condition: New